4 channels HDMI MPEG4 AVC H.264 MPEG2 to 4 QAM DVB-C DVB-T ATSC-T ISDB-T RF Encoder Modulator

Product overview
YNS-3542A series products are Kunuomagic’s new breakthrough all-in-one devices which integrate encoding (MPEG-2 HD/SD, MPEG-4/AVC H.264 HD/SD) and modulating to convert V/A signals into Digital RF output. It has equipped with 4 HDMI (4 SDI optional) channels input and 1 ASI input and output with 2 ASI ports and 1 UDP IP (4*SPTS) port.
The latency problem has been greatly reduced to achieve an extremely low value from the encoding progress to the decoding terminals.
It adopts inner drawer-type structural design which greatly facilitates the change of encoding modules (HDMI/SDI /…) as needed.
The signals source could be from satellite receivers, closed-circuit television cameras, Blue-ray players, and antenna etc. Its output signals are to be received by DVB-C TVs or STBs and etc.
 
Key Features
Huge video buffer (for SDI interface), free to switch video sources
MPEG1 Layer II, MPEG2-AAC, MPEG4-AAC, AC3 2.0(Optional)audio encoding
Up to 1920*1080@50P/60P (MPEG4 AVC/H.264)
Up to 1920*1080@50I/60I (MPEG2 HD)
4* HDMI/SDI input
1*ASI input for re-mux; 1*RF input for mix
Support CC (closed caption ) for SDI interface (Optional)
Simultaneously encoding each channel more than 10Mbps
DVB-C/DVB-T/ATSC-T/ISDB-T RF out
Support 4 * SPTS or 1 MPTS output
Extremely low latency
LCN support (Logical Channel Number)
Excellent modulation quality MER≥42dB
RF Frequency range 30Mhz~960Mhz
LCD display, Remote control and firmware
Web NMS management; Updates via web
Lowest cost per channel
 
Specification

Audio

 Modulator Section
DVB-C